Mira Minimal EV

Temperature and flow control

• Thermostatic technology
• Single sequential cartridge

Installation

• Water entry points: Rear only
• Inlet connections: Direct 15mm push fit connections
• Outlet connections: 1/2″ BSP Male
• Reversed inlets supported: No = hot left, cold right only

Supply Conditions (hot and cold)

• Cold water range: 1°C to 25°C
• Hot water range: Min 55°C; 60°C – 65°C (recommended)
• Minimum maintained pressure (gas water heater) 1 bar
• Minimum maintained pressure (gravity system) : 0.1 bar (1 metre head)
• Maximum maintained pressure: 5.0 bar (50 metre head)

Performance

• Flow rate (at handset): 9.5l/min at 0.5 bar
• Flow regulator: 9l/min (supplied with product)
• Temperature stability: ± 2°C

Safety Features

• Automatic shutdown: Shutdown within 2 secs
• Factory set to safe max temp
• Adjustable maximum temperature for on-site conditions

Product Approvals

• KIWA Approved
• WRAS Approved
• TMV2 Approved