Mira Elite SE 9.8kW Dual Electric Shower | Showers Direct

Mira Elite SE 9.8kW Dual Pumped Electric Shower

£348.50

In stock

 

Dual Showering

Switch between a 2oomm deluge head or handshower using the clever diverter

Silent Showering

Quiet Mark™ approved – pump cannot be heard when water is running

Easy to clean filter

The Mira Clean-flo™ filter is designed to be easily accessible, to enable self-cleaning to maintain shower performance

 

 

Supply conditions (tank fed only)

 

Free Delivery

Free Delivery over £100
Years Warranty

Description

The introduction of the new Mira Elite SE Dual with 200mm deluge overhead and separate handheld shower provides an experience that no other pumped electric shower can match. Users can switch in an instant between the two heads and with Mira’s patented diverter valve there is no loss of showering temperature.

This combined with the Quiet Mark awarded silent motor, add up to the perfect showering experience. It works by taking cold water on low pressure, gravity-fed systems and silently delivering a strong and consistent performance. The overhead and single-mode hand shower both have rub clean nozzles for convenient cleaning.

2-Year Warranty

Product number: 1.1941.003

Features

Dual Showering

Switch between a 2oomm deluge head or handset using the clever diverter

Powerful performance

The integrated pump provides a strong and consistent flow – suitable for low-pressure water supply

Silent Showering

Quiet Mark™ approved – the pump cannot be heard when water is running

Easy to clean filter

The Mira Clean-flo™ filter is designed to be easily accessible, to enable self-cleaning to maintain shower performance

Simple settings

On/off push-button for ease of use, plus separate flow and temperature controls. Shower on demand

Greater coverage

200mm deluge overhead and 90mm single-mode hand shower. Both in a chrome-plated finish

Ideal replacement

The same footprint and screw holes as the Elite QT and ST makes it an easy replacement

Specification

Temperature control

  • Control type: Pressure stabilised
  • Factory set to safe max temp: No

Installation Information

  • Inlet connections: 15mm compression fitting
  • Outlet connections: 1/2″ BSP Male
  • Supply Voltage: 230v +/- 10%
  • Supply rating 45 amp
  • Terminal block connections: Maximum 16mm
  • Water entry points: Left (rising, falling and rear)
  • Cable entry points: Left (rising, falling and rear)

Supply Conditions

  • Minimum maintained pressure: 0.008 bar
  • Maximum maintained pressure: 1.0 bar

Easy to Fit and Maintain

  • Uses the same footprint and screw holes as Elite ST and Elite QT.
  • Removable Clean-flo™ filter to protect your shower from debris, making it easier for you to keep your shower in peak condition.

Benefits for your customer

  • 200mm overhead and 90mm single-mode hand shower both with rub clean nozzles for convenient cleaning.
  • Water heated on demand meaning you can run the shower for as long as needed, perfect for large households.
  • An integrated pump boosts your shower on a low-pressure system.
  • The pump cannot be heard when water is running. Awarded the Quiet Mark™.

Product Approvals

  • WRAS Approved
  • BEAB
  • CE
  • Quiet Mark™

Reviews

There are no reviews yet.

Be the first to review “Mira Elite SE 9.8kW Dual Pumped Electric Shower”

You may also like…